The working principle of the connector of Suda Electronics
- Categories:Industry Information
- Author:
- Origin:
- Time of issue:2020-07-28
- Views:
The working principle of the connector of Suda Electronics
- Categories:Industry Information
- Author:
- Origin:
- Time of issue:2020-07-28
- Views:
The working principle of the connector of Suda Electronics: You may not know the connector. The so-called connector refers to two or more containers that communicate with each other below the liquid level. Connectors with the same liquid and the same pressure on the liquid surface have the same liquid surface height.
(1) Mianyang electronic product connectors contain the same liquid, but the pressure on the liquid surface is different, so the pressure difference on the liquid surface is equal to the pressure difference caused by the liquid level difference between the two containers of the connector.
(2) The pressure on the liquid surface of the Mianyang electronic product connector is equal, but the liquids on both sides are different. The height of the two liquid surfaces from the interface is inversely proportional to the density of the liquid.
The connector principle of Suda Electronics is widely used in engineering. Such as various liquid level gauges (water level gauges, oil level gauges, etc.). Vacuum gauge, liquid column air pressure gauge, differential pressure gauge, etc. They are all manufactured using the principles of communication equipment. By understanding the definition and working principle of connectors, we can better understand and develop the connector market.
The basic performance of Suda Electronics' connectors can be divided into three categories: mechanical performance, electrical performance and environmental performance. Another important mechanical performance is the mechanical life of the connector. The mechanical life is actually a durability index, which is called mechanical operation in GB5095.
Super Electronic Company.png
It takes one insertion and one withdrawal as a cycle to judge whether the connector can normally complete its connection function (such as contact resistance value) after the specified insertion cycle.
Imagine what would happen without a connector. At this point, the circuit should be permanently connected with continuous conductors. For example, if an electronic device is connected to a power source, both ends of the connecting wire must be fixed and fastened to the electronic device and the power source by some method (such as welding).
In this way, it brings a lot of inconvenience to both production and use. Take car batteries as an example. Assuming that the battery cable is fixedly welded to the battery, the car manufacturer increases the workload, production time and cost of installing the battery. When the battery is damaged and needs to be replaced, the car must be sent to the repair station, the old one must be removed by desoldering, and then the new one is welded, which will pay more labor costs.
You can save a lot of trouble with the Suda Electronics connector, just buy a new battery from the store, disconnect the connector, remove the old battery, install the new battery, and then reconnect the connector. This simple example illustrates the benefits of connectors. It makes the design and production process more convenient and flexible, and reduces production and maintenance costs.
Previous:
Suda Electronics: The role of capacitors
Recommended News

Suda Electronics: The role of capacitors

The working principle of the connector of Suda Electronics
2020-07-28

Suda Electronics: The advantages of solid state relays
2020-07-26

Mianyang Auto Parts Company: Why is the conversion of automobile oil to gas so popular?
2020-07-23

Mianyang Auto Parts Company: What should I pay attention to when using a cigarette lighter?
2020-07-03

Mianyang Auto Parts Company: A comprehensive introduction to auto parts
2020-06-28

Mianyang Auto Parts Company tells you the detailed parts of each system
2020-06-23

Mianyang Auto Parts Company: Some things about accessories!
2020-06-18

How to buy Sichuan auto parts?
2020-06-12

Industry economic environment analysis
2019-09-12
Recommended Business

Heze Geli Plastic Co., Ltd.
2020-09-24

Shenzhen Kangjie Lubricant Co., Ltd.
2020-09-24

Epson China Co., Ltd. Guangzhou Branch
2020-09-24

Fuyang City Xindeng Town Ultrafiltration Hardware Business Department
2020-09-24

Xin Hongtai Electronic Technology Co., Ltd.
2020-09-24

Inner Mongolia Nengbao Electronics Co., Ltd.
2020-09-24
Exhibition Information
About Us | Stay Cooperation | Delivery Policy | After-sales Service | Contact Us
COPYRIGHT © 2020 Auto Parts Online All Rights Reserved 丨 Icp No.19031523
Complaint Email Address Of This Website:846273991@qq.com Complaint Telephone Number:13990130299 China Internet Reporting Center Telephone Number:12377
Headquarters: No. 2 Road, Industrial Park, Mianyang Economic Experimental Zone, China, Sichuan, China Post Code:621000 Tel:0816-6282800 Fax:0816-6282800 Powered by www.300.cn


